Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

1121

● For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the

slot/port information.

count

value

Enter the keyword count then the number of debug outputs. The range is from 1

to 65534. The default is infinity.

Defaults None

Command Modes EXEC Privilege

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

Networking OS Command Line Reference Guide.

Version Description

9.11(0.0) Introduced on the C9010.

9.9(0.0) Introduced on the Z9500.

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9000

switches.

device–role

Specify the role of the device attached to the port.

Syntax

device-role {host | router}

To reset the device role, use the no device-role {host | router} command.

Parameters

host Enter the keyword host to set the device-role as host.

router Enter the keyword router to set the device-role as router.

Defaults None

Command Modes POLICY LIST CONFIGURATION