Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

1131

● ipv6 nd raguard policy policy-name — define the RA guard policy name and enter the RA guard policy

configuration mode.

other–config–flag

Enable the verification of the advertised other configuration parameter. If this command is not configured, the verification

process is bypassed.

Syntax

other-config-flag {on | off}

To reset the other configuration parameter, use the no other-config-flag {on | off}

command.

Parameters

on Enter the keyword on to set the other-config-flag value as ON.

off Enter the keyword off to set the other-config flag value as OFF.

Defaults None

Command Modes POLICY LIST CONFIGURATION

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

Networking OS Command Line Reference Guide.

Version Description

9.11(0.0) Introduced on the C9010.

9.9(0.0) Introduced on the Z9500.

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000–ON.

9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and Z9000 switches.

Commands

● ipv6 nd ra-guard enable — configure the RA guard related commands.

● ipv6 nd raguard policy policy-name — define the router advertisement (RA) guard policy name and

enter the RA guard policy configuration mode.

reachable–time

Enable the verification of the configured reachability time in the received RA packets.

Syntax

reachable—time value

To reset the advertised reachability time, use the no reachable-timevalue command.

Parameters

value

Enter the advertised reachability time in milliseconds. The range is from 0 to

3,600,000 milliseconds.