Administrator Guide

IPv6 route 2040::/64 metric threshold
Metric threshold is Up (STATIC/0/0)
5 changes, last change 00:02:16
Metric threshold down 255 up 254
First-hop interface is TenGigabitEthernet 1/2/1
Tracked by:
VRRP TenGigabitEthernet 2/3/4 IPv6 VRID 1
Track 3
IPv6 route 2050::/64 reachability
Reachability is Up (STATIC)
5 changes, last change 00:02:16
First-hop interface is TenGigabitEthernet 1/2/1
Tracked by:
VRRP TenGigabitEthernet 2/3/4 IPv6 VRID 1
Example (Brief)
Dell>show track brief
ResId Resource Parameter State LastChange
1 IP route reachability 10.16.0.0/16 Up 00:01:08
2 Interface line-protocol Ethernet0/2 Down 00:05:00
3 Interface ip routing VLAN100 Up 01:10:05
Related
Commands
● show running-config track – displays configuration information about tracked objects.
● track interface ip routing – configures object tracking on the routing status of an IPv4 Layer 3
interface.
● track interface line-protocol – configures object tracking on the line-protocol state of a Layer 2
interface.
● track ip route metric threshold – configures object tracking on the threshold of an IPv4 route metric.
● track ip route reachability – configures object tracking on the reachability of an IPv4 route.
●
threshold metric
Configure the metric threshold used to determine the UP and/or DOWN state of a tracked IPv4 or IPv6 route.
C9000 Series
Syntax
threshold metric {up number | down number}
To return to the default setting, use the no threshold metric {up number | down number}
command.
Parameters
up number Enter a number for the UP threshold to be applied to the scaled metric of an IPv4
or IPv6 route. The default UP threshold is 254. The routing state is UP if the scaled
route metric is less than or equal to the UP threshold.
down number Enter a number for the DOWN threshold to be applied to the scaled metric of an
IPv4 or IPv6 route. The default DOWN threshold is 255. The routing state is
DOWN if the scaled route metric is greater than or equal to the DOWN threshold.
Defaults none
Command Modes OBJECT TRACKING (conf_track_object-id)
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Object Tracking 1143