Administrator Guide
The protocol-specific resolution value calculates the scaled metric by dividing a route's cost by the
resolution value set for the route protocol:
● For ISIS, you can set the resolution in the range of 1 to 1000, where the default is 10.
● For OSPF, you can set the resolution in the range of 1 to 1592, where the default is 1.
● You cannot configure the resolution value used to map static routes. By default, Dell Networking OS
assigns a metric of 0 to static routes.
● You cannot configure the resolution value used to map RIP routes. The RIP hop-count is automatically
multiplied by 16 to scale it. For example, a RIP metric of 16 (unreachable) scales to 256, which
considers the route to be DOWN.
Related
Commands
● threshold metric – configures the metric threshold used to determine the UP and/or DOWN state of a
tracked route.
● track ipv6 route metric threshold – configures object tracking on the threshold of an IPv6 route
metric.
1156 Object Tracking