Administrator Guide

redistribute
Redistribute information from another routing protocol throughout the OSPF process.
C9000 Series
Syntax
redistribute {connected | rip | static} [metric metric-value | metric-type
type-value] [route-map map-name] [tag tag-value]
To disable redistribution, use the no redistribute {connected | isis | rip | static}
command.
Parameters
connected Enter the keyword connected to specify that information from active routes on
interfaces is redistributed.
rip Enter the keyword rip to specify that RIP routing information is redistributed.
static Enter the keyword static to specify that information from static routes is
redistributed.
metric metric-
value
(OPTIONAL) Enter the keyword metric then a number. The range is from 0
(zero) to 16777214.
metric-type
type-value
(OPTIONAL) Enter the keywords metric-type then one of the following:
● 1 = OSPF External type 1
● 2 = OSPF External type 2
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of the route map.
tag tag-value (OPTIONAL) Enter the keyword tag then a number. The range is from 0 to
4294967295.
Defaults Not configured.
Command Modes ROUTER OSPF
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
Usage
Information
To redistribute the default route (0.0.0.0/0), configure the default-information originate
command.
Related
Commands
default-information originate — generates a default route into the OSPF routing domain.
1186 Open Shortest Path First (OSPFv2 and OSPFv3)