Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

1201

link-state-id

(OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID value depends

on the LSA type, and it can be one of the following:

● the network’s IP address for Type 3 LSAs or Type 5 LSAs

● the router’s OSPF router ID for Type 1 LSAs or Type 4 LSAs

● the default destination (0.0.0.0) for Type 5 LSAs

adv-router

ip-

address

(OPTIONAL) Enter the keywords adv-router and the ip-address to display only

the LSA information about that router.

Command Modes

● EXEC

● EXEC Privilege

Command

History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

9.4(0.0) Added support for VRF on all platforms (Except MXL and STOMP).

9.2(1.0) Introduced on the Z9500.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.8.1.0 Added support for Multi-Process OSPF.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

6.1.1.1 Introduced on the E-Series.

Commands

show ip ospf database — displays OSPF database information.

show ip ospf database opaque-link

Display the opaque-link (type 9) LSA information.

C9000 Series

Syntax

show ip ospf [process-id| vrf vrf-name] database opaque-link [link-state-

id] [adv-router ip-address]

Parameters

process-id

Enter the OSPF Process ID to show a specific process. If no Process ID is entered,

command applies only to the first OSPF process.

vrf

vrf-name

Enter the keyword vrf and the name of the VRF to view opaque-link LSA

information corresponding to the OSPF process that is tied to a specific VRF.