Administrator Guide

The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.4(0.0) Added support for VRF on all platforms (Except MXL and STOMP).
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
Usage
Information
The following describes the show ip ospf process-id database router command shown in
the following example.
Item Description
LS Age Displays the LSA age.
Options Displays the optional capabilities available on router. The following options can be
found in this item:
● TOS-capability or No TOS-capability is displayed depending on whether the
router can support Type of Service.
● DC or No DC is displayed depending on whether the originating router can
support OSPF over demand circuits.
● E or No E is displayed on whether the originating router can accept AS External
LSAs.
LS Type Displays the LSA type.
Link State ID Displays the Link State ID.
Advertising
Router
Identifies the router ID of the LSA’s originating router.
LS Seq Number Displays the link state sequence number. This number detects duplicate or old
LSAs.
Checksum Displays the Fletcher checksum of an LSA’s complete contents.
Length Displays the length in bytes of the LSA.
Number of Links Displays the number of active links to the type of router (Area Border Router or AS
Boundary Router) listed in the previous line.
Link connected
to:
Identifies the type of network to which the router is connected.
(Link ID) Identifies the link type and address.
(Link Data) Identifies the router interface address.
Number of TOS
Metric
Lists the number of TOS metrics.
TOS 0 Metric Lists the number of TOS 0 metrics.
Example
Dell#show ip ospf 100 database router
OSPF Router with ID (1.1.1.10) (Process ID 100)
1206 Open Shortest Path First (OSPFv2 and OSPFv3)