Administrator Guide

Defaults none
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.4(0.0) Added support for VRF on all platforms (Except MXL and STOMP).
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series and E-Series.
Usage
Information
This command is useful in isolating routing problems between the OSPF and the RTM. For example, if a
route is missing from the RTM/FIB but is visible from the display output of this command, the problem is
with downloading the route to the RTM.
This command has the following limitations:
● The display output is sorted by prefixes; intra-area ECMP routes are not displayed together.
● For Type 2 external routes, Type 1 cost is not displayed.
Example
Dell#show ip ospf 100 route
Prefix Cost Nexthop Interface Area Type
1.1.1.1 1 0.0.0.0 Lo 0 0 Intra-Area
3.3.3.3 2 13.0.0.3 Te 0/47 1 Intra-Area
13.0.0.0 1 0.0.0.0 Te 0/47 0 Intra-Area
150.150.150.0 2 13.0.0.3 Te 0/47 - External
172.30.1.0 2 13.0.0.3 Te 0/47 1 Intra-Area
Dell#
show ip ospf statistics
Display OSPF statistics.
C9000 Series
Syntax
show ip ospf [process-id | vrf vrf-name] statistics global | [interface
name {neighbor router-id}]
Parameters
process-id Enter the OSPF Process ID to show a specific process. If no Process ID is entered,
command applies only to the first OSPF process.
vrf vrf-name Enter the keyword vrf and the name of the VRF to display statistics
corresponding to the OSPF process that is tied to a specific VRF.
global Enter the keyword global to display the packet counts received on all running
OSPF interfaces and packet counts OSPF neighbors receive and transmit.
Open Shortest Path First (OSPFv2 and OSPFv3) 1213