Administrator Guide

● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.4(0.0) Added support for VRF on all platforms (Except MXL and STOMP).
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series and E-Series.
Usage
Information
To isolate problems with inter-area and external routes, use this command. In OSPF inter-area and
external routes are calculated by adding LSA cost to the cost of reaching the router. If an inter-area or
external route is not of correct cost, the display can determine if the path to the originating router is
correct or not.
Example
Dell#show ip ospf 1 topology
Router ID Flags Cost Nexthop Interface Area
3.3.3.3 E/B/-/ 1 20.0.0.3 Te 13/1 0
1.1.1.1 E/-/-/ 1 10.0.0.1 Te 7/1 1
Dell#
summary-address
To advertise one external route, set the OSPF ASBR.
C9000 Series
Syntax
summary-address ip-address mask [not-advertise] [tag tag-value]
To disable summary address, use the no summary-address ip-address mask command.
Parameters
ip-address Specify the IP address in dotted decimal format of the address to summarize.
mask Specify the mask in dotted decimal format of the address to summarize.
not-advertise (OPTIONAL) Enter the keywords not-advertise to suppress that match the
network prefix/mask pair.
tag tag-value (OPTIONAL) Enter the keyword tag then a value to match on routes redistributed
through a route map. The range is from 0 to 4294967295.
Defaults Not configured.
Command Modes ROUTER OSPF
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
1218 Open Shortest Path First (OSPFv2 and OSPFv3)