Administrator Guide

Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for the Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre- 6.1.1.1 Introduced on the E-Series.
area range
Summarize routes matching an address or mask at an area border router (ABR).
Syntax
area area-id range ip-address mask [not-advertise]
To disable route summarization, use the no area area-id range ip-address mask command.
Parameters
area-id For area-id, you can enter a number. The range is from 0 to 4294967295.
ip-address Specify an IPv6 address.
mask Specify a mask for the destination prefix.
not-advertise (OPTIONAL) Enter the keywords not-advertise to set the status to
DoNotAdvertise (that is, the Type 3 summary-LSA is suppressed and the
component networks remain hidden from other areas).
Defaults Not configured
Command Modes ROUTER OSPFv3
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.14(2.8) Introduced on the C9000, S3048-ON, S3100, S4048-ON, S4048T-ON, S5048F-
ON, and S6100-ON.
Usage
Information
Only the routes within an area are summarized, and that summary is advertised to other areas by the
ABR. External routes are not summarized.
Open Shortest Path First (OSPFv2 and OSPFv3) 1225