Administrator Guide

Version Description
7.8.1.0 Added support for C-Series.
7.4.1.0 Introduced on E-Series.
Example
Example (detail)
Command Fields
Lines
Beginning
With or
Including
Description
OSPFv3... Debugging is on for all OSPFv3 packets and all interfaces.
05:21:01 Displays the time stamp.
Sending Ver:3 Sending OSPF3 version..
type: Displays the type of packet sent:
● 1 - Hello packet
● 2 - database description
● 3 - link state request
● 4 - link state update
● 5 - link state acknowledgement
Length: Displays the OSPFv3 packet length.
Router ID: Displays the OSPFv3 router ID.
Area ID: Displays the OSPFv3 area ID.
Chksum: Displays the OSPFv3 checksum.
debug ipv6 ospf spf
Display debug information for SPF timers on OSPF IPv6 packets.
Syntax
[no] debug ipv6 ospf spf
Parameters
interface
(OPTIONAL) Enter one of the following keywords and slot/port or number
information:
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
● For a port channel interface, enter the keywords port-channel then a
number.
● For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.11.0.0 Introduced the command.
Usage
Information
The following section describes the command fields.
Open Shortest Path First (OSPFv2 and OSPFv3) 1231