Administrator Guide

Lines
Beginning
With or
Including
Description
OSPFv3... Debugging is on for all OSPFv3 packets and all interfaces.
05:21:01 Displays the time stamp.
Sending Ver:3 Sending OSPF3 version..
Example
default-information originate
Configure the system to generate a default external route into an OSPFv3 routing domain.
C9000 Series
Syntax
default-information originate [always] [metric metric-value] [metric-type
type-value] [route-map map-name]
To return to the default values, use the no default-information originate command.
Parameters
always (OPTIONAL) Enter the keyword always to specify that default route information
must always be advertised.
metric metric-
value
(OPTIONAL) Enter the keyword metric then a number to configure a metric
value for the route. The range is from 1 to 16777214.
metric-type
type-value
(OPTIONAL) Enter the keywords metric-type then an OSPFv3 link state type
of 1 or 2 for default routes. The values are:
● 1 = Type 1 external route
● 2 = Type 2 external route
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of an established
route map.
Defaults Disabled.
Command Modes ROUTER OSPFv3
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
9.1.(0.0) Introduced on the S4810 and Z9000.
8.3.19.0 Introduced on the S4820T.
7.8.1.0 Added support for C-Series.
7.4.1.0 Introduced on the E-Series.
Related
Commands
redistribute — redistributes routes from other routing protocols into OSPFv3.
1232 Open Shortest Path First (OSPFv2 and OSPFv3)