Administrator Guide
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C1048P.
Example
Dell#show control-bridge status
Reason: CNU - CSP Not Up, IPE - IPC Program Error
PPE - PEM Program Error, CPE - CHM Program Error
UE - UnKnown Error
CB System MAC : 34:17:eb:00:20:00
Csp Sess Status : UP
Active CB : YES
Uplink LAG : Port-channel 257
LAG Admin Status : UP
LAG Oper Status : UP
--------------------------------
Status Reason RPM-Id PE-Id
--------------------------------
Online - 0 255
Usage
Information
Use the show control-bridge status command output information to debug the connectivity
issues between the control bridge and port extender.
show system
Display the status of a specific stack-unit from the port extender (PE) console.
Syntax
show system [brief | stack-unit unit-id | stack-ports [status | topology]
Parameters
brief (OPTIONAL) Enter the keyword brief to view an abbreviated list of system
information.
stack-unit
unit-id
(OPTIONAL) Enter the keywords stack-unit then the stack unit number for
information. The stack-unit number range is from 0 to 7.
stack-ports
status
|
topology
(OPTIONAL) Enter the keywords stack-ports for information about the status
or topology of the stack ports.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010 and C1048P.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Added support for the disabled-ports parameter .
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.11.4 The brief parameter no longer displays the current Reload mode. To display
Reload mode, use the show reload-type command. Modified the show
system stack-unit command output to support Piece Part ID (PPID).
1262 PE Console Commands