Administrator Guide

disable Turn off privileged commands
enable Turn on privileged commands
exit Exit from the EXEC
format Format a filesystem
pwd Display current working directory
rename Rename a file
reset Reset selected card
show PE Show running system information
telnet-peer-stack-unit Open a telnet connection to the peer
stack-unit
Example
Dell#telnet-peer-stack-unit
Trying Unit 2...
Connected to Unit 2.
Exit character is '^]'.
Login: admin
Password:
Jun 24 10:14:11: %PE-UNKN-UNIT2-S:CP %SEC-5-LOGIN_SUCCESS: Login
successful for user admin on line vty0 ( Unit 3 )
Dell(standby)>en
Dell(standby)#exit
Session terminated for user admin on line vty 0 ( Unit 3 )
Closed connection.
Dell#Jun 24 10:14:29: %PE-UNKN-UNIT2-S:CP %SEC-5-LOGOUT: Exec session is
terminated for user admin on line vty0 ( Unit 3 )
upgrade system
Upgrade the Dell Networking OS image to the stack-unit.
C9000 Series
Syntax
upgrade system {stack-unit unit number | all } {usbflash: | flash:} {rpmA:|
rpmB:}
Parameters
stack-unit unit
number
Enter the keyword stack-unit and specify the stack-unit ID to sync the image
to that of the stack-unit or enter all to sync the image on all stack-units. The
stack-unit number range is from 0 to 7.
all Enter the keyword all to sync the image on all the stack-units configured.
flash: file-url Enter the keyword flash: and specify the location of the image file in the
format //directory-path or press Enter to launch a prompt sequence.
usbflash: file-url Enter the keyword usbflash: and copy the image from usbflash file
systemusbflash://filepath press Enter to launch a prompt sequence.
rpmA: | rpm B: Specify the flash partition of the operating-system image that you want to
upgrade.
Defaults none
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010 and C1048P.
PE Console Commands 1267