Administrator Guide
reset
Reset or reboot the linecard, RPM, PE and PE stack-unit.
C9000 Series
Syntax
reset {linecard slot-id | rpm slot id [hard] | pe pe-id [stack-unit unit-
number]}
From a PE console, use reset stack-unit unit-number [hard] to reset the stack-unit.
Parameters
linecard
slot-id
Enter the keyword linecard and the slot-id number to specify the set of line-
card ports for reset. The slot ID range is from 0 to 11.
rpm Enter the keyword rpm and the slot-id number to specify the route processor
module (RPM) ports for reset. The range for the RPM card ports is from 0 to 1.
hard (Optional) Reboot (power cycle) the specified line card, RPM card, or PE stack-
unit (The hard option for PE is only available from PE console).
pe
pe-id
Enter the keyword pe and the port extender (PE) ID. The range for pe-id is from 0
to 255.
stack-unit
unit-
number
(Optional) Enter the keyword stack-unit and the stack-unit number. The range
is from 0 to 7.
Defaults none
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010 and C1048P.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.3.1.0 Added the hard reset option.
7.8.1.0 Augmented to run on the standby unit in order to reset the standby unit directly.
7.7.1.0 Introduced on the S-Series.
Usage
Information
Resetting is a soft reboot, including flushing the forwarding tables. The hard option is available for PE
stack-unit from the PE console only.
To reset (soft reboot) a stack-unit from PE console, use the reset command and specify the stack-unit
number. To perform a hard reset or power-cycle to a specified stack-unit, use the reset stack-unit
unit-number hard command.
Example: linecard
Dell#reset linecard 0
Dell#Jun 24 15:26:39: %RPM1-P:CP %CHMGR-5-LINECARD_RESET: linecard 0
being reset
Jun 24 15:26:39: %RPM1-P:CP %CHMGR-2-LINECARD_DOWN: linecard 0 down -
reset
Jun 24 15:26:39: %RPM1-P:CP %IFMGR-1-DEL_PORT: Removed port: Fo 0/0-20,
Dell#Jun 24 15:28:24: %RPM1-P:CP %CHMGR-5-CHECKIN: Checkin from linecard
1270 PE Stacking