Administrator Guide

show hardware pe
Display input and output traffic statistics and other operational information about a specified hardware component.
C9000 Series
Syntax
show hardware pe pe-id stack-unit unit number {cpu | drops | stack-port |
unit}
Parameters
pe pe-id stack
unit unit-number
Enter pe pe-id stack-unit unit number parameters with a command
option to display hardware statistics from the specified port extender (PE) and
stack-unit. The port extender ID range is from 0 to 255 and the stack-unit ID range
is from 0 to 7. The command options are:
● cpu data-plane statistics: Displays data-plane statistics, including
thebc pci driver statistics for the device.
● drops unit unit number [user—port {port {port-num |
range}]: Displays the number of internal drops of control-plane and protocol
control packets on the port specified. User port range is 1–51.
● stack-port Displays traffic statistics for the stacking ports on a specified PE.
● unit unit-number to view with the following options:
○ counters: Displays the traffic counters.
○ details: Displays more detailed hardware information.
○ port-stats: Displays the internal statistics on a per-port basis.
○ register: Displays the internal registers.
○ table-dump: Displays the tables from the bShell.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
9.2(0.0) Modified the drops keyword range, unit keyword range and added the buffer
and cpu management statistics options.
8.3.19.0 Introduced on the S4820T.
8.3.11.5 Added i2c statistics and sata-interfaces statistics.
8.3.11.4 Added user port information.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Modified the stack-port keyword range expanded from 49-52 to 0-52; output
modified for the cpu data-plane statistics option; the following options
were added: drops [unit 0-1 [port 0-27]] and unit 0-1 {counters
| details | port-stats [detail] | register}
7.7.1.0 Introduced on the S-Series.
PE Stacking 1275