Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

1311

Version Description

9.9(0.0) Introduced on the C9010.

9.8(0.0) Introduced on the S3048-ON and S4048-ON.

9.7(0.0) Introduced on the S6000-ON and added support for VRF.

9.5(0.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.1.1.0 Introduced on the E-Series ExaScale.

7.8.1.0 Introduced on the C-Series for the port-channels and the S-Series.

7.7.1.1 Introduced

Usage

Information

This command configures an expiration timer for all S.G entries, unless they are assigned to an Extended

ACL.

Even though the FHR nodes act as RPs, these nodes still send Register encap messages to themselves

and expect to receive a Register stop message (for Anycast RP support). As a result, if the DLT timer

expires, SG is not deleted until the register state is deleted in the node. This register state expires 210

seconds after the last Null register is received.

show ip pim bsr-router

View information on the Bootstrap router.

C9000 Series

Syntax

show ip pim bsr-router

Command Modes

● EXEC

● EXEC Privilege

Command

History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.