Administrator Guide
Usage
Information
You can use the show reset-reason without the stack-unit option to view the reason for the last
system reboot of the local system.
Example —
Unknown reason
If the reason for the last system reboot is not available, the system displays the reason as N/A.
DellEMC# show reload-reason
Cause: N/A
Time: N/A
Example
DellEMC# show reset-reason
Last Reset Reason:
---------------------
Type Cause Time
-----------------------------------------------------------------------------------
rpm 0 (CP) Reboot by Software 11/05/2017-08:05
rpm 0 (RP) Reboot by Software 11/05/2017-08:05
rpm 1 (CP) Power on Reset N/A
rpm 1 (RP) Power on Reset N/A
linecard 0 N/A N/A
linecard 1 N/A N/A
linecard 2 N/A N/A
linecard 3 N/A N/A
linecard 4 Warm Reset N/A
linecard 5 N/A N/A
linecard 6 N/A N/A
linecard 7 N/A N/A
linecard 8 N/A N/A
linecard 9 N/A N/A
linecard 10 Power on Reset N/A
linecard 11 Power on Reset N/A
DellEMC#show reset-reason pe all
Last Reset Reason:
---------------------
Type Cause
Time
---------------------------------------------------------------------------
--------
PE ID: 10
==========
stack-unit 0 N/A N/
A
stack-unit 1 N/A N/
A
stack-unit 2 N/A N/
A
stack-unit 3 Reboot by Software
11/02/2017-08:15
stack-unit 4 N/A N/
A
stack-unit 5 N/A N/
A
stack-unit 6 N/A N/
A
stack-unit 7 N/A N/
A
PE ID: 20
==========
stack-unit 0 N/A N/
A
stack-unit 1 Reboot by Software
11/02/2017-04:10
stack-unit 2 N/A N/
A
stack-unit 3 N/A N/
A
stack-unit 4 N/A N/
A
Control and Monitoring
133