Administrator Guide

Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.11.3.0 Introduced on the Z9100-ON, S4048-ON, S6000-ON, S6100-ON, S4048T-ON,
S3100, S6010-ON, S3048-ON, and C9010.
Example
Dell#show ipv6 pim tib
PIM Multicast Routing Table
Flags: D - Dense, S - Sparse, C - Connected, L - Local, P - Pruned,
R - RP-bit set, F - Register flag, T - SPT-bit set, J - Join SPT,
M - MSDP created entry, A - Candidate for MSDP Advertisement
K - Ack-Pending State
Timers: Uptime/Expires
Interface state: Interface, next-Hop, State/Mode
(25::1, ff0e::225:1:2:1), uptime 00:09:53, expires 00:00:00,flags: CJ
RPF neighbor: TenGigabitEthernet 1/3, fe80::201:e8ff:fe00:6265
Outgoing interface list:
TenGigabitEthernet 2/11
(25::1, ff0e::225:1:2:2), uptime 00:09:54, expires 00:00:00,flags: CJ
RPF neighbor: TenGigabitEthernet 1/3, fe80::201:e8ff:fe00:6265
Outgoing interface list:
TenGigabitEthernet 1/11
(25::2, ff0e::225:1:2:2), uptime 00:09:54, expires 00:00:00,flags: CJ
RPF neighbor: TenGigabitEthernet 1/3, fe80::201:e8ff:fe00:6265
Outgoing interface list:
TenGigabitEthernet 1/11
(25::1, ff0e::226:1:2:1), uptime 00:09:54, expires 00:00:00,flags: CJ
RPF neighbor: TenGigabitEthernet 1/3, fe80::201:e8ff:fe00:6265
Outgoing interface list:
TenGigabitEthernet 1/11
Dell#
Related
Commands
clear ipv6 pim tib – clears the IPv6 PIM tree information base (TIB)
1336 PIM-Sparse Mode (PIM-SM)