Administrator Guide

pe
Add a pre-provisioned port extender (PE) .
C9000 Series
Syntax
pe pe-id
To remove a port extender, use the no pe pe-id command.
Parameters
pe pe-id Enter keyword pe and PE ID. The range is from 0 to 255.
Default None
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Usage
Information
The pe pe-id command adds a pre-provisioned PE. The port extender ID (pe-id) range is from 0 to
255. You can add a port extender stack-unit using stack-unit unit number keyword.
To remove a port extender, use the no pe pe-id command.
Example
Entering pe context
DELL(conf)# pe 0
Removing pe 0
DELL(conf)# no pe 0
Entering port extender configuration mode:
DELL(conf)#pe 10
DELL(conf-pe-10)#
DELL(conf-pe-10)#stack-unit 0 type c1048P
Related
Commands
● stack-unit – add or delete a specified port extender stack-unit.
● show pe —display the port extender status and details.
pe provision
Logically provision or add a port extender (PE).
C9000 Series
Syntax
pe provision pe-id
To de-provision or delete a port extender, use the no pe provision pe-id command.
Parameters
pe provision pe-
id
Enter port-extender configuration mode to logically provision a port extender. Port
extender ID range is from 0 to 255
Default None
1350 Port Extenders (PE)