Administrator Guide

pe-id1,pe-
id2,...........
Enter a list of port extender IDs that you want to schedule for rebooting with each
pe-id delimited by a coma.
no-confirm Enter the keyword no-confirm to suppress the warning messages that are
displayed during rebooting of the PE.
Command Modes
● EXEC Privilege
Usage
Information
● The reset pe range command is applicable for the entire PE stack-unit. This command is not used
for per stack-unit scenario.
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.13(0.0) Added the range keyword to the command.
9.9(0.0) Introduced on the C9010.
Example
The following command resets all the PEs within range 1 to 5: reset pe range 1-5 no-confirm.
The following command resets all the PEs within range 5 to 10 and also the pe-ids 1 and 3: reset pe
range 1,3,5-10 no-confirm.
reset pe schedule show
Display a list of PEs that are scheduled to be rebooted.
Syntax
reset pe schedule show
Defaults None.
Command Modes
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.13(0.0) Introduced on the C9010.
Example
JobID Status Scheduled Start Time Scheduled PE's
000 Scheduled 08:59-09/19/17 0,1
001 Scheduled 23:30-09/19/17 2,3
002 Scheduled 20:30-12/29/17 5-6
reset pe unschedule
Use this command to undo the scheduled PR reboot configuration.
Syntax
reset pe unschedule job-id
Defaults None.
Parameters
job-id Enter the job ID of the scheduled PE reboot configuration that you want to undo.
Command Modes
● EXEC Privilege
Port Extenders (PE) 1353