Administrator Guide

Dell Networking OS Version : 9.9(0.0)
Jumbo Capable : yes
Dell#show rpm all
-- Route Processor Modules --
Slot Status NxtBoot Version
--------------------------------------------------------
0 active online 9.9(0.0)
1 booting
Related
Commands
● show chassis – view information on all elements of the system.
● show linecard– view information on a line card.
show software ifm
Display interface management (IFM) data.
C9000 Series
Syntax
show software ifm {clients [summary] | ifagt number | ifcb interface |
linecard slot-id | trace-flags}
Parameters
clients Enter the keyword clients to display IFM client information.
summary (OPTIONAL) Enter the keyword summary to display brief information about IFM
clients.
ifagt number Enter the keyword ifagt then the number of an interface agent to display
software pipe and IPC statistics.
ifcb interface Enter the keyword ifcb then one of the following interface IDs then the slot/port
information to display interface control block information for that interface:
● For a Port Channel interface, enter the keyword port-channel then a
number: The range is from 1 to 128.
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE.
linecard slot-id Enter the linecard slot-id parameters to specify the switch ports on a line
card. The range of slot IDs is from 0 to 11.
trace-flags Enter the keyword trace-flags to display IFM information for internal trace
flags.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9 (0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
136 Control and Monitoring