Administrator Guide

Version Description
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
7.6.1.0 Introduced for the C-Series and S-Series.
Example
Dell# show software ifm clients summary
ClntType Inst svcMask subSvcMask tlvSvcMask tlvSubSvc swp
IPM 0 0x00000000 0x00000000 0x90ff71f3 0x021e0e81 31
RTM 0 0x00000000 0x00000000 0x800010ff 0x01930000 43
VRRP 0 0x00000000 0x00000000 0x803330f3 0x00400000 39
L2PM 0 0x00000000 0x00000000 0x87ff79ff 0x0e032200 45
ACL 0 0x00000000 0x00000000 0x867f50c3 0x000f0218 44
OSPF 0 0x00000dfa 0x00400098 0x00000000 0x00000000 0
PIM 0 0x000000f3 0x00030000 0x00000000 0x00000000 0
IGMP 0 0x000e027f 0x00000000 0x00000000 0x00000000 0
SNMP 0 0x00000000 0x00000000 0x800302c0 0x00000002 30
EVTTERM 0 0x00000000 0x00000000 0x800002c0 0x00000000 29
MRTM 0 0x00000000 0x00000200 0x81f7103f 0x00000000 38
DSM 0 0x00000000 0x00000000 0x80771003 0x00000000 32
LACP 0 0x00000000 0x00000000 0x8000383f 0x00000000 35
DHCP 0 0x00000000 0x00000000 0x800000c2 0x0000c000 37
V6RAD 0 0x00000433 0x00030000 0x00000000 0x00000000 0
Unidentified Client0 0x006e0002 0x00000000 0x00000000 0x00000000 0
Dell#
Dell#show software ifm linecard 0
linecard: 0
cardType = 516 numPorts = 144
numCfgPorts = 0 cardId = 0x7f0a0a0d
cardState = 3 prevHello = 0:0
notifSeqNum = 1 ifaNotifSeqNum = 0 0
cardAlive = 0 pStatusMask = 0xffffffff
ppStatus[0] = 0x00000001 ppStatus[1] = 0x00000001
Dell# show software ifm linecard 0 | find cardstate ignore-case
cardState = 3 prevHello = 0:0
notifSeqNum = 1 ifaNotifSeqNum = 0 0
cardAlive = 0 pStatusMask = 0xffffffff
ppStatus[0] = 0x00000001 ppStatus[1] = 0x00000001
Dell# show software ifm linecard 0 | save flash://sh_sf_ifm_linecard0
Start saving show command report .......
show system linecard
Display the status of a specified linecard.
Syntax
show system linecard slot-id fanout {configured | count}
Parameters
slot-id Enter the linecard slot-id. The slot-id range is from 0 to 11.
count Enter the keyword count to view the fanout ports configured or present on a
linecard.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Control and Monitoring 137