Administrator Guide

service-d (Optional) Enter the keyword option service-id to display the statistics with a
specified service or module ID.
pq-stats Enter the keyword pq-stats to display a summary of priority queue (PQ) based
statistics.
High (Optional) Enter the keyword High to display the statistics for the high priority
queue.
Medium (Optional) Enter the keyword Medium to display the statistics for the medium
priority queue.
Low (Optional) Enter the keyword Low to display the statistics for the low priority
queue.
reg-client Enter the reg-client keyword to display the registered manager — agent /
(client) information.
Defaults None
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010. and C1048P.
Usage
Information
The show software pemgr command is supported on a C1048P console.
Example: show
software pemgr
pe 0 ipc-stats
Dell#show software pemgr pe-id 1 ipc-stats
IPC Message Based Statistics
---------------------------
Serivce Name : CLI Service Id : 0x10
MType : 0x1771 EndPoint : CB
EnQCount : 0 packets DeQCount :
0 packets
Messages in Q : 0 packets
AVG Q Proc Time : 0 ticks Max Q Proc
Time : 0 ticks
AVG Proc Time : 0 ticks Max Proc
Time : 0 ticks
Serivce Name : SYSADMTSK Service Id : 0x21
MType : 0x1c29 EndPoint : CB
EnQCount : 8 packets DeQCount :
8 packets
Messages in Q : 0 packets
AVG Q Proc Time : 2 ticks Max Q Proc
Time : 3 ticks
AVG Proc Time : 2 ticks Max Proc
Time : 3 ticks
Serivce Name : PEMGR Service Id : 0x14e
MType : 0x192 EndPoint : CB
EnQCount : 38c packets DeQCount :
38c packets
Messages in Q : 0 packets
1370
Port Extenders (PE)