Administrator Guide

The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Example
Dell#sh system linecard 6 fanout configured
Configured fan out ports in linecard 6
Configured Present
0 0
4 4
8 8
12 12
16 16
20 20
Dell#sh system linecard 6 fanout count
Fan out ports in linecard 6
Configured = 6
Present = 6
show tech-support
Display a collection of data from other show commands, necessary for Dell Networking technical support to troubleshoot switch
operation.
C9000 Series
Syntax
show tech-support [linecard slot-id | page | pe pe-id stack-unit unit-
number]
From a PE console, use show tech-support stack-unit unit-number page
Parameters
linecard slot-id Enter the slot ID of the line card for which you want to collect information for tech
support. The range of slot IDs is from 0 to 11. Enter linecard all to collect
troubleshooting information on all line cards.
page (OPTIONAL) Enter the keyword page to view 24 lines of text at a time. Press the
SPACE BAR to view the next 24 lines. Press the ENTER key to view the next line
of text.
pe pe-id (OPTIONAL) Enter the keyword pe and the port extender(PE) ID. The PE ID range
is from 0 to 255.
NOTE: The pe option is only visible when the extended bridge feature is
enabled.
stack-unit unit-
number
Enter the keyword stack-unit and the unit number. The stack-unit range is from
0 to 7.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9 (0.0) Introduced on the C9010 and C1048P.
9.2(1.0) Introduced on the Z9500.
138 Control and Monitoring