Administrator Guide

-------- ------
PeGi 0/0/0 30.00/0.00 0.00 NO_PD -
low 0
power inline restore pe
Enable the temporarily suspended PoE power supply to all the ports in a port extender unit.
C9000 Series
Syntax
power inline restore pe pe-id stack-unit unit number
Parameters
pe pe-id Enter the keyword pe and the port extender ID. Range is from 0 to 255.
stack-unit unit
number
Enter the keyword stack-unit and the stack-unit number. Range is from 0 to 7.
Defaults None
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Usage
Information
The power inline restore pe command enables or restores the temporarily suspended PoE power
supply to all the ports on a port extender unit.
Example
Dell#power inline restore pe 1 stack-unit 2
power inline suspend pe
Disable PoE power supply to all the ports in a port extender unit temporarily.
C9000 Series
Syntax
power inline suspend pe pe-id stack-unit unit number
Parameters
pe pe-id Enter the keyword pe and the port extender ID. Range is 0–255.
stack-unit unit
number
Enter the keyword stack-unit and the stack unit number. Range is 0–7.
Defaults None
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Port Extenders (PE) 1385