Administrator Guide

Interface Inline Power Inline Power Class Device PoE
Port LLDP
Max / Alloc Consumed Type
Priority Support
(Watts) (Watts)
------------- ------------ ------------ ------- ------
-------- ------
PeGi 255/0/0 30.00/21.40 21.50 4 2
low 0
show power detail
Display the inline power consumption details for a port extender.
C9000 Series
Syntax
show power detail {pe pe-id stack-unit unit number}
Parameters
pe Enter the keywordpe and the port externder ID. Range is 0–255.
stack-unit Enter the stack-unit keyword and the unit ID. Range is 0–7.
Defaults None
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Example
Dell#show power detail pe 2 stack‐unit 1
Unit Total System Redundancy Inline Inline Inline Inline Inline
Power Power Power Power Power Power Power Power
Available Consumed Consumed Threshold Available Allocated
Consumed Remaining
(Watts) (Watts) (Watts) (%) (Watts) (Watts) (Watts)
(Watts)
‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
2/1 2000.00 150 150 90 1530.00 308.00 190.00
1222.00
show revision
View the PoE controller firmware version running on the port extender.
C9000 Series
Syntax
show revision {pe pe-id stack-unit unit number}
From a PE console, use show revision to view the revision levels.
Parameters
pe pe-id Enter the keyword pe and the port extender ID. Range is from 0 to 255.
1388 Port Extenders (PE)