Administrator Guide

stack-unit unit-
number
Enter the keyword stack-unit and the unit number. Range is from 0 to 7.
Defaults None
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010 and C1048P.
Example
Dell#show revision pe 0
DEVICE IMAGE INFORMATION :
-----------------------------------------------------
Type Version Target
FPGA 3.7 LP (0)
CPLD 3.0 LP (0)
IAP 3.1 LP (0)
FPGA 3.7 LP (1)
CPLD 3.0 LP (1)
IAP 3.1 LP (1)
FPGA 3.7 LP (2)
CPLD 3.0 LP (2)
IAP 3.1 LP (2)
FPGA 3.7 LP (3)
CPLD 3.0 LP (3)
IAP 3.1 LP (3)
FPGA 3.7 LP (4)
CPLD 3.0 LP (4)
IAP 3.1 LP (4)
FPGA 3.7 LP (5)
CPLD 3.0 LP (5)
IAP 3.1 LP (5)
FPGA 3.7 LP (6)
CPLD 3.0 LP (6)
IAP 3.1 LP (6)
FPGA 3.7 LP (7)
CPLD 3.0 LP (7)
IAP 3.1 LP (7)
FPGA 3.7 LP (8)
CPLD 3.0 LP (8)
IAP 3.1 LP (8)
FPGA 1 3.9 CP
CPLD 3.5 CP
FPGA 2 2.0 CP
Backup FPGA 2.0 CP
IAP 3.1 CP
CPLD 16 pe (0/0)
Boot Flash 3.3.1.7 pe (0/0)
CPLD 16 pe (1/0)
Boot Flash 3.3.1.7 pe (1/0)
CPLD 16 pe (2/0)
Boot Flash 3.3.1.7 pe (2/0)
CPLD 16 pe (4/0)
Boot Flash 3.3.1.7 pe (4/0)
CPLD 13 pe (6/100)
Boot Flash pe (6/100)
Exmaple (PE
Console)
Dell#show revision
-- Stack unit 1 --
CPLD : 13
Port Extenders (PE) 1389