Administrator Guide

Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced save to the file options.
7.6.1.0 Introduced on the S-Series.
Usage
Information
Without the page or linecard option, the command output is continuous. To interrupt the command
output, use Ctrl-z.
The save option works with other filtering commands. This allows you to save specific information of a
show command. The save entry must always be the last option. For example: Dell#show tech-
support |grep regular-expression |except regular-expression | find regular-
expression | save flash://result
This display output is an accumulation of the same information that is displayed when you execute one of
the following show commands:
● show clock
●
show control-bridge status
● show environment
● show HA information
● show interfaces
● show inventory
● show lldp neighbors
● show processes cpu
● show processes cpu summary
● show processes memory
● show running-conf
●
show system stack-ports
● show version
Example
Dell#show tech-support linecard 0
----------------------------------- show version ---------------------------
Dell Real Time Operating System Software
Dell Operating System Version: 2.0
Dell Application Software Version: 1-0(0-4095)
Copyright (c) 1999-2015 by Dell Inc. All Rights Reserved.
Build Time: Thu Jun 25 18:00:00 2015
Build Path: /build/build01/SW/SRC
Dell Networking OS uptime is 59 minute(s)
System image file is "system://A"
System Type: C9010
Control Processor:Intel Rangeley with 2 Gbytes (2127536128 bytes) of memory,
core(s) 2.
Route Processor:Intel Rangeley with 2 Gbytes (2127536128 bytes) of memory,
core(s) 2.
16G bytes of boot flash memory.
2 Route Processor Module.
3 24-port TE/GE
3 24-port TE/GE
4 6-port TE/FG
2 4-port TE/GE
200 Ten GigabitEthernet/IEEE 802.3 interface(s)
12 Forty GigabitEthernet/IEEE 802.3 interface(s)
----------------------------------- show linecard 0 verbose ------------
-- Linecard 0 --
Status : online
Next Boot : online
Required Type : C9000LC2410T - 24-port TE/GE
Current Type : C9000LC2410T - 24-port TE/GE
Hardware Rev : 4.0
Num Ports : 24
Up Time : 57 min, 21 sec
Dell Networking OS Version : 1-0(0-4095)
Control and Monitoring
139