Administrator Guide

Version Description
8.1.1.0 Introduced on the E-Series ExaScale.
7.7.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Introduced on the E-Series.
Usage
Information
You can configure a port extender (PE) Gigabit Ethernet peGigE port as a source port in the source
(port monitoring) command and monitor traffic flow on this port. You cannot configure a cascade
port as a destination port.
Example
Dell# monitor session 0
source Port-channel 10 destination TenGigabitEthernet 0/33 direction tx
Port Monitoring 1397