Administrator Guide

Parameters
vlan-id (OPTIONAL) Enter a VLAN ID number to display the PVLAN configuration.
community vlan-
id
(OPTIONAL) Enter the keyword community and a PVLAN ID number to display
the configuration for a community PVLAN.
interface
interface
(OPTIONAL) Enter the keyword interface and specify the interface type and
slot/port numbers or port-channel number to display the PVLAN configuration for a
member interface. The valid values are:
● For a port channel interface, enter the keyword port-channel and a port-
channel ID.
● For a 10-Gigabit Ethernet interface, enter the keyword
tenGigabitEthernet then the slot/port information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
● For a port extender (PE) Gigabit Ethernet interface, enter the keyword peGigE
then the pe-id / stack-unit / port-id information.
● For a port extender 10-Gigabit Ethernet interface, enter the keyword
peTenGigE then the pe-id / stack-unit / port-id information. The pe-id range
is from 0 to 255; the stack-unit unit-number range is from 0 to 7; and the port-
id range is 25 to 28 or 49 to 52 depending on the PE.
isolated (OPTIONAL) Enter the keyword isolated and a PVLAN ID number to display the
configuration of an isolated PVLAN.
mapping (OPTIONAL) Enter the keyword mapping to display the community and isolated
PVLAN mapping to primary PVLANs.
primary vlan-id (OPTIONAL) Enter the keyword primary and a PVLAN ID number to display the
configuration of a primary PVLAN.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.13.0.1P1 Introduced peTenGigE interface support on the C9010.
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.1 Introduced on the S4810.
7.8.1.0 Introduced on the C-Series and S-Series.
Usage
Information
Examples of all types of command output are shown below. The first type of output is the result of not
entering an optional keyword. It displays a detailed list of all PVLANs and their member VLANs and
interfaces. The other types of output show details about PVLAN subsets.
The following describes the show private-vlan command shown in the Examples below.
Field Description
Primary Displays the VLAN ID of the designated or associated primary VLAN(s).
Secondary Displays the VLAN ID of the designated or associated secondary VLAN(s).
Private VLAN (PVLAN) 1403