Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

1421

match mac dot1p

Configure a match criterion for a class map based on a dot1p value.

C9000 Series

Syntax

match mac dot1p {dot1p-list}

Parameters

dot1p-list Enter a dot1p value. The range is from 0 to 7.

Defaults none

Command Modes CLASS-MAP

Command

History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

9.2(1.0) Introduced on the Z9500.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.2.1.0 Available on the C-Series and S-Series.

7.5.1.0 Added support for the DSCP Marking option.

7.4.1.0 Introduced.

Usage

Information

To access this command, enter the class-map command. After the class map is identified, you can

configure the match criteria.

Commands

class-map — identifies the class map.

match mac vlan

Configure a match criterion for a class map based on VLAN ID.