Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

1431

Version Description

9.9(0.0) Introduced on the C9010.

9.2(1.0) Introduced on the Z9500.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.6.1.0 Introduced on the C-Series and S-Series.

6.1.1.1 Introduced on the E-Series.

Usage

Information

A single policy-map can be attached to one or more interfaces to specify the service-policy for those

interfaces. A policy map attached to an interface can be modified.

Commands

policy-map-output — creates an output policy map.

service-queue

Assign a class map and QoS policy to different queues.

C9000 Series

Syntax

service-queue queue-id [class-map class-map-name] [qos-policy qos-policy-

name]

To remove the queue assignment, use the no service-queue queue-id [class-map class-

map-name] [qos-policy qos-policy-name] command.

Parameters

queue-id

Enter the value used to identify a queue. The range is from 0 to 7.

class-map

class-

map-name

(OPTIONAL) Enter the keyword class-map then the class map name assigned to

the queue in character format (32 character maximum).

NOTE: This option is available under policy-map-input only.

qos-policy

qos-

policy-name

(OPTIONAL) Enter the keywords qos-policy then the QoS policy name assigned

to the queue in text format (32 characters maximum). This specifies the input QoS

policy assigned to the queue under policy-map-input and output QoS policy

under policy-map-output context.

Defaults none

Command Modes CONFIGURATION (conf-policy-map-in and conf-policy-map-out)

Command

History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.