Administrator Guide

show rmon log
Display the contents of the RMON log table.
C9000 Series
Syntax
show rmon log [index] [brief]
Parameters
index (OPTIONAL) Enter the table index number to display just that entry.
brief (OPTIONAL) Enter the keyword brief to display the RMON log table in an easy-
to-read format.
Defaults none
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage
Information
The log table has a maximum of 500 entries. If the log exceeds that maximum, the oldest log entry is
purged to allow room for the new entry.
Example (Index)
Dell#show rmon log 2
RMON log entry, alarm table index 2, log index 1
log time: 14638 (THU AUG 12 22:10:40 2004)
description: 2
Dell#
Example (Brief)
Dell#show rmon logs brief
eventIndex logIndex description
---------------------------------------------------------------------
1 1 "DELTA RISING LOG TRAP"
2 1 "DELTA FALLING LOG TRAP"
2 2 "DELTA FALLING LOG TRAP"
Remote Monitoring (RMON) 1477