Administrator Guide

redistribute isis
Redistribute routing information from an IS-IS instance.
C9000 Series
Syntax
redistribute isis [tag] [level-1 | level-1-2 | level-2] [metric metric-
value] [route-map map-name]
To disable redistribution, use the no redistribute isis [tag] [level-1 | level-1-2 |
level-2] [metric metric-value] [route-map map-name] command.
Parameters
tag (OPTIONAL) Enter the name of the IS-IS routing process.
level-1 (OPTIONAL) Enter the keywords level-1 to redistribute only IS-IS Level-1
routes.
level-1-2 (OPTIONAL) Enter the keywords level-1-2 to redistribute both IS-IS Level-1
and Level-2 routes.
level-2 (OPTIONAL) Enter the keywords level-2 to redistribute only IS-IS Level-2
routes.
metric metric-
value
(OPTIONAL) Enter the keyword metric then a number as the metric value. The
range is from 0 to 16.
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of a configured route
map.
Defaults Not configured.
Command Modes ROUTER RIP
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
6.2.1.1 Introduced on the E-Series.
redistribute ospf
Redistribute routing information from an OSPF process.
C9000 Series
Syntax
redistribute ospf process-id [match external {1 | 2} | match internal |
metric metric-value] [route-map map-name]
To disable redistribution, use the no redistribute ospf process-id [match external {1
| 2} | match internal | metric metric-value] [route-map map-name] command.
1496 Routing Information Protocol (RIP)