Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

1491

Parameters

process-id

Enter a number that corresponds to the OSPF process ID to redistribute. The range

is from 1 to 65355.

match external {1

| 2}

(OPTIONAL) Enter the keywords match external then the numbers 1 or 2 to

indicated that external 1 routes or external 2 routes should be redistributed.

match internal (OPTIONAL) Enter the keywords match internal to indicate that internal

routes should be redistributed.

metric

metric-

value

(OPTIONAL) Enter the keyword metric then a number as the metric value. The

range is from 0 to 16.

route-map

map-

name

(OPTIONAL) Enter the keywords route-map then the name of a configured route

map.

Defaults Not configured.

Command Modes ROUTER RIP

Command

History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

9.2(1.0) Introduced on the Z9500.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.8.1.0 Introduced on the S-Series.

7.6.1.0 Introduced on the C-Series.

6.2.1.1 Introduced on the E-Series.

router rip

To configure and enable RIP, enter ROUTER RIP mode.

C9000 Series

Syntax