Administrator Guide

route-map for Route-map mode
router for Router mode
addrole Enter the keyword addrole to add permission to the command. You cannot add
or delete rights for the sysadmin role.
deleterole
Enter the keyword deleterole to remove access to the command. You cannot add
or delete rights for the sysadmin role.
role-name Enter a text string for the name of the user role up to 63 characters. These are 3
system defined roles you can modify: secadmin, netadmin, and netoperator.
reset Enter the keyword reset to reset all roles back to default for that command.
command Enter the command’s keywords to assign the command to a certain access level.
You can enter one or more keywords.
Defaults none
Command Modes CONFIGURATION
Command
History
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.0) Introduced on the Z9000, S6000, S4820T, S4810, and MXL.
show role
Display information on permissions assigned to a command, including user role and/or permission level.
C9000
Syntax
show role mode {mode} {command}
Parameters
command Enter the command’s keywords to assign the command to a certain access level.
You can enter one or all of the keywords.
mode mode Enter keyword then one of the following modes.
● configure
● exec
● interface
● line
● route-map
● router
Defaults none
Command Modes EXEC Privilege
Command
History
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.0) Introduced on the Z9000, S6000, S4820T, S4810, MXL
Examples
Dell#show role mode configure username
Role access: sysadmin
Security 1505