Administrator Guide

show util-threshold memory
Display the memory utilization thresholds of switch CPUs.
C9000 Series
Syntax
show util—threshold memory
Defaults None
Command Modes EXEC Privilege
Command
History
Version Description
9.9 (0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.4.1.0 Introduced on the C-Series, E-Series, S25 and S50.
Usage
Information
Use the show util-threshold memory command to display the memory utilization thresholds used
to send SNMP traps. When switch CPUs exceed the configured (high or low) memory percentage to
process packets or data, a threshold notification is sent as an SNMP trap. To reconfigure the currently
configured values, use the util-threshold memory command.
Example
Dell#show util-threshold memory
Processor High Low
================================
CP 92 82
RP 92 82
LP 0 92 82
LP 1 92 82
LP 2 92 82
LP 3 92 82
LP 4 92 82
LP 5 92 82
LP 6 92 82
LP 7 92 82
LP 8 92 82
LP 9 92 82
LP 10 92 82
LP 11 92 82
PE 92 82
Related
Commands
● util-threshold mem – Configure memory utilization thresholds.
● util-threshold cpu – Configure CPU utilization thresholds.
show version
Display the current Dell Networking OS version information on the system.
C9000 Series
Syntax
show version [all |[pe pe-id]
From a PE console, use show version to view the software version information.
Control and Monitoring 151