Administrator Guide

The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
radius-server host
Configure a RADIUS server host.
C9000 Series
Syntax
radius-server host {hostname | ipv4-address | ipv6-address} [auth-port
port-number] [retransmit retries] [timeout seconds] [key [encryption-type]
key]
Parameters
hostname Enter the name of the RADIUS server host.
ipv4-address |
ipv6-address
Enter the IPv4 address (A.B.C.D) or IPv6 address (X:X:X:X::X) of the RADIUS
server host.
auth-port port-
number
(OPTIONAL) Enter the keywords auth-port then a number as the port number.
The range is from zero (0) to 65535. The default port-number is 1812.
retransmit
retries
(OPTIONAL) Enter the keyword retransmit then a number as the number of
attempts. This parameter overwrites the radius-server retransmit
command. The range is from zero (0) to 100. The default is 3 attempts.
timeout seconds (OPTIONAL) Enter the keyword timeout then the seconds the time interval the
switch waits for a reply from the RADIUS server. This parameter overwrites the
radius-server timeout command. The range is from 0 to 1000. The default is
5 seconds.
key [ encryption-
type ] key
(OPTIONAL) Enter the keyword key then an optional encryption-type and a string
up to 42 characters long as the authentication key. The RADIUS host server uses
this authentication key and the RADIUS daemon operating on this switch.
For the encryption-type, enter either zero (0) or 7 as the encryption type for the
key entered. The options are:
● 0 is the default and means the password is not encrypted and stored as clear
text.
● 7 means that the password is encrypted and hidden.
Configure this parameter last because leading spaces are ignored.
Defaults Not configured.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
1540 Security