Administrator Guide

root-password Enter the root password.
Defaults Not configured
Command Modes CONFIGURATION
Command
History
Version Description
9.13(0.0) Introduced on the S3100 series, S3048–ON, S4048–ON, S4048T-ON, S5000,
S6000, S6000–ON, S6010–ON, S6100–ON, Z9100–ON, Z9500, C9010, MXL, and
FN-IOM.
Usage
Information
If you configure the secure-cli command on the system, the Dell EMC Networking OS resets any
previously-configured root access password to the default root password without displaying any warning
message. With the secure-cli command enabled on the system, the CONFIGURATION mode does not
display the root access password option.
When you configure the root access password, ensure that your password meets the following criteria:
● A minimum of eight characters in length
● A minimum of one lower case letter (a to z)
● A minimum of one upper case letter (A to Z)
● A minimum of one numeric character (0 to 9)
● A minimum of one special character including a space (" !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~")
If your password does not meet the criteria, the system does not accept your password.
If you use encryption type 9, the system stores the clear text password in an inaccessible location on the
system. The show running-configuration command does not display the password. This
configuration is not portable between different systems.
Example
DellEMC)# show running-config | g root
root-access password 7
f4dc0cb9787722dd1084d17f417f164cc7f730d4f03d4f0215294cbd899614e3
verified boot hash
Verify and store the hash value of the startup configuration.
Syntax
verified boot hash startup-config hash value
Parameters
startup-config Enter the keyword startup-config and then the hash value for the startup
configuration. You can get the hash value for the startup configuration using the
generate hash command.
hash value Enter the MD5, SHA1, or SHA256 hash.
Defaults None
Command Modes EXEC Privilege
Command
History
Version Description
9.13(0.0) Introduced on the S3100 series, S3048–ON, S4048–ON, S4048T-ON, S5000,
S6000, S6000–ON, S6010–ON, S6100–ON, Z9100–ON, Z9500, C9010, MXL, and
FN-IOM.
Usage
Information
Dell EMC Networking OS supports MD5, SHA1, and SHA256.
Example
DellEMC# verified boot hash system-image A:
619A8C1B7A2BC9692A221E2151B9DA9E
Security 1591