Administrator Guide

Version Description
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series, E-Series TeraScale, and E-Series ExaScale. Maximum
rate limit on E-Series reduced from 4000 to 3000.
7.4.1.0 Introduced
Example
Dell(conf)#interface vlan 4001
Dell(conf-if-vl-4001-stack)#protocol-tunnel rate-limit 100
Related
Commands
show protocol-tunnel — displays tunneling information for all VLANs.
show running-config — displays the current configuration.
show protocol-tunnel
Display protocol tunnel information for all or a specified VLAN-Stack VLAN.
C9000 Series
Syntax
show protocol-tunnel [vlan vlan-id]
Parameters
vlan vlan-id (OPTIONAL) Enter the keyword vlan then the VLAN ID to display information for
the one VLAN. The range is from 1 to 4094.
Defaults none
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series, E-Series and E-Series ExaScale.
7.4.1.0 Introduced
Example
Dell#show protocol-tunnel
VLAN Protocols Rate-limit(Kbps) Interface
4001 STP,PVST - Te 1/17 Te 1/19
4002 STP,PVST - Te 1/16 Te 1/18
Dell#
Dell#show protocol-tunnel vlan 4001
VLAN Protocols Rate-limit(Kbps) Interface
4001 STP,PVST - Te 1/17 Te 1/19
Service Provider Bridging 1597