Administrator Guide

Example
Dell#show snmp user
User name: v1v2creadu
Engine ID: 0000178B02000001E80214A8
storage-type: nonvolatile active
Authentication Protocol: None
Privacy Protocol: None
Dell#
snmp context
Enables you to map a bgp vrf instance within a SNMP context through community mapping, in SNMPv2c and SNMPv3.
Syntax
[no] snmp context [context name]
Parameters
context name
Enter a unique name for the context.
Defaults None
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.13(0.0) Introduced on all DNOS platforms.
Usage
Information
This command is used for mapping SNMP context to a VRF instance within a community, in SNMPv2c
and SNMPv3. The no version of this command turns off this feature.
snmp ifmib ifalias long
Display the entire description string through the Interface MIB, which would be truncated otherwise to 63 characters.
C9000 Series
Syntax
snmp ifmib ifalias long
Defaults Interface description truncated beyond 63 characters.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
1616 Simple Network Management Protocol (SNMP) and Syslog