Administrator Guide

Related
Commands
show logging — displays information logged to the history buffer.
logging history size
Specify the number of messages stored in the logging history table.
C9000 Series
Syntax
logging history size size
To return to the default values, use the no logging history size command.
Parameters
size Indicate a value as the number of messages to be stored. The range is from 0 to
500. The default is 1 message.
Defaults 1 message
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
Usage
Information
When the number of messages reach the limit you set with the logging history size command,
older messages are deleted as newer ones are added to the table.
Related
Commands
show logging — displays information logged to the history buffer.
logging monitor
Specify which messages are logged to Telnet applications.
C9000 Series
Syntax
logging monitor [level]
To disable logging to terminal connections, use the no logging monitor command.
Parameters
level Indicate a value from 0 to 7 or enter one of the following parameters:
emergencies, alerts, critical, errors, warnings, notifications,
informational, or debugging. The default is 7 or debugging.
Defaults 7 or debugging
Command Modes CONFIGURATION
1642 Simple Network Management Protocol (SNMP) and Syslog