Administrator Guide

To copy a file on
a NFS-mounted
system
enter nfsmount://<mount-point/filepath
NOTE: While switching to a remote NFS file system, it is
mandatory to specify the mount-point that indicates the
working directory on the NFS file system. You cannot
enter the root directory of the remote NFS file system.
To copy the
running
configuration
enter the keyword running-config
To copy the
startup
configuration
enter the keyword startup-config
To copy using a
Secure Copy
(SCP),
enter the keyword scp:
● If you enter scp: in the source position, enter the target
URL;
● If you enter scp: in the target position, first enter the
source URL;
To copy a file on
a TFTP server
enter tftp://hostip/filepath
To copy a file
from an external
USB drive
enter usbflash://filepath
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.11(0.0) Introduced on N20xx and N30xx series.
9.9(0.0) Introduced on the C9010 and C1048P.
9.7(0.1) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON. Added the nfsmount:<mount-point>
parameters to support remote NFS file system.
9.4(0.0) Added the compressed-config parameter.
9.0.2.0 Introduced on the S6000.
8.4.1.0 Added IPv6 addressing support for FTP, TFTP, and SCP.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Added usbflash and rpm0usbflash commands on E-Series ExaScale.
7.6.1.0 Introduced on the S-Series and added the SSH port number to the SCP prompt
sequence on all systems.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage
Information
Dell Networking OS supports a maximum of 100 files at the root directory level, on both the internal and
external Flash.
168 File Management