Administrator Guide

Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the M I/O Aggregator and FN IOM.
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000,
S6000–ON, Z9500, MXL.
Usage
Information
The passwords are stored encrypted in the running configuration.
enable
Enable communication with the SupportAssist server.
Syntax
enable
To disable communication to a specific SupportAssist server, use the no enable command.
Defaults Enabled
Command Modes SUPPORTASSIST SERVER
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the M I/O Aggregator and FN IOM.
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000,
S6000–ON, Z9500, MXL.
Related
Commands
● server — configure the name of the remote SupportAssist server.
url
Configure the URL to reach the SupportAssist remote server.
Syntax
url uniform-resource-locator
To delete the URL for the server, use the no url command.
Parameters
uniform-
resource-locator
Enter a text string for the URL using one of the following formats:
● http://[username:password@]<hostip>:<portNum>/<filepath>
● https://[username:password@]<hostip>:<portNum>/<filepath>
NOTE: The host IP for the server may be specified as an IPv4 address, an
IPv6 address or as a DNS hostname. If using the DNS hostname, the DNS
resolver will need to be configured and enabled.
Command Modes SUPPORTASSIST SERVER
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
1698 SupportAssist