Administrator Guide

Destination file name [startup-config]:
User name to login remote host: spbalaji
Password to login remote host:
!
6655 bytes successfully copied
Dell#copy tftp: flash:
Address or name of remote host []: 1.1.1.1
Source file name []: Test
Destination file name [Test]:
Example (PE
Console)
Dell# copy flash://Diag_Test_Report_SU_1.txt flash://PE255_Report.txt
!
19705 bytes successfully copied
Related
Commands
cd– changes the working directory.
delete
Delete a file from the flash. After deletion, files cannot be restored.
C9000 Series
Syntax
delete flash-url [no-confirm]
From a PE console, use delete {flash: file name/path | usbflash file name/
path[no-confirm]}
Parameters
flash-url Enter the following location and keywords:
● For a file or directory on the internal Flash, enter flash:// followed by the
filename or directory name.
● For a file or directory on the NFS mounted file system, enter nfsmount://
followed by the mount point and the file path.
NOTE: While deleting a file directory on a remote NFS file system, it is
mandatory to specify the mount-point that indicates the working directory
on the NFS file system. You cannot delete the root directory of the remote
NFS file system.
●
For a file or directory on an external USB drive, enter usbflash:// followed
by the filename or directory name.
flash:
([[flash://]direct
ory_path])
Enter the internal file name and the file path.
usbflash:
([[usbflash://]di
rectory_path])
Enter the USB flash file name and the file path.
no-confirm (OPTIONAL) Enter the keyword no-confirm to specify that Dell Networking OS
does not require user input for each file prior to deletion.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
170 File Management