Administrator Guide

Version Description
8.5.1.0 Added support for 4-port 40G line cards.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
ntp step-threshold
Configure the step-threshold time interval.
Syntax
ntp step-threshold value
To return to the default NTP step-threshold value, use the no ntp step-threshold command.
Parameters
value Enter the threshold value in milliseconds. The range is from 128 to
5000 milliseconds (5 seconds).
Defaults 128 milliseconds
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command-Line Reference Guide.
Version Description
9.14(2.3) Introduced on the C9000, S3048-ON, S3100 series, S4048-ON, S4048T-ON,
S5048F-ON, S6000, S6000-ON, S6010-ON, S6100-ON, and Z9100-ON.
Usage
Information
The ntp step-threshold command is used to configure a step threshold value from 128 to 5000
milliseconds (5 seconds). You can use the no form of the command to reset to the default value of 128
milliseconds.
Example
DellEMC(config)# ntp step-threshold 5000
ntp trusted-key
Set a key to authenticate the system to which NTP synchronizes.
Syntax
ntp trusted-key number
To delete the key, use the no ntp trusted-key number command.
Parameters
number Enter a number as the trusted key ID. The range is from 1 to 65534.
Defaults Not configured.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.14(0.0) The trusted-key range value is increased from 1 to 65534.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
1714 System Time and Date