Administrator Guide

show vlt private-vlan
Display the private VLAN (PVLAN) associated with the VLT LAG for VLT peer nodes.
C9000 Series
Syntax
show vlt private-vlan
Command Modes EXEC
Command
History
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.1) Introduced on the Z9500.
9.4(0.0) Introduced on the S6000.
9.3(0.0) Introduced on the Z9000, S4810, and S4820T.
Usage
Information
If you add an ICL or VLTi link as a member of a primary VLAN, the ICL becomes a part of the primary
VLAN and its associated secondary VLANs, similar to the behavior for normal trunk ports. VLAN
symmetry is not validated if you associate an ICL to a PVLAN. Similarly, if you dissociate an ICL from a
PVLAN, although the PVLAN symmetry exists, ICL is removed from that PVLAN in such a case. The ICL
Status field denotes the type of the VLAN port of the VLTi link configured in a PVLAN.
Example
Dell#show vlt private-vlan vlan-id
Codes: C- Community, I – Isolated, V – Internally tagged, T – tagged, *
- VLT Pvlan
Primary Secondary ICL Status
10 V (*)
20(C) V
30 (I) V
40 T
50(C) T
60 (I) T
show vlt role
Displays the VLT peer status, role of the local VLT switch, VLT system MAC address and system priority, and the MAC address
and priority of the local VLT device.
C9000 Series
Syntax
show vlt role
Default Not configured.
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.1) Introduced on the Z9500.
Virtual Link Trunking (VLT) 1749