Administrator Guide

Parameters
port-channel Configure the proxy-gateway interface port-channel. Port channel range is from 1
to 128.
vlan-range
Enter the VLAN IDs in which proxy gateway is not needed. The VLANs are excluded
from doing proxy gateway. The value can be a single VLAN ID or comma-separated,
VLAN IDs or a range of VLAN IDs or a combination. For example:
Comma-separated: 3, 4, 6
Range: 5-10
Combination: 3, 4, 5-10, 8
Command Modes VLT DOMAIN PROXY GW LLDP
Command
History
Version Description
9.9(0.0) Introduced on the C9010.
9.7(0.1) Introduced on the S3048-ON.
9.7(0.1) Introduced on the S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
Usage
Information
The VLT port channel interface which is connecting to the remote VLT domain must be configured as
peer-domain-link. Configure the VLANs that needs to be excluded from VLT Proxy Gateway.
Example
Dell(conf)#vlt-domain 1
Dell(conf-vlt-domain)#proxy-gateway lldp
Dell(conf-vlt-domain-proxy-gw-lldp)#peer-domain-link port-channel 20
exclude-vlan 3
proxy-gateway lldp
Enables the proxy-gateway feature using LLDP protocol.
C9000 Series
Syntax
[no] proxy-gateway lldp
Command Modes VLT DOMAIN
Command
History
Version Description
9.9(0.0) Introduced on the C9010.
9.7(0.1) Introduced on the S3048-ON.
9.7(0.1) Introduced on the S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
Usage
Information
The configuration is cached and sent to LLDP only in one of the following conditions:
1) The port-channel connecting the two VLT domains, across DC, must be a VLT LAG
2) The protocol lldp command is globally enabled
Virtual Link Trunking (VLT) 1755