Manualshelf

Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch
1771177217731774177517761777177817791780
Parameters
seconds
Enter the number of seconds for the delay for VRRP initialization after an interface
becomes operational. The range is from 0 to 900 (0 indicates no delay).
Defaults 0
Command Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.8.0 Introduced on the S4810.
Usage
Information
This command applies to a single interface. When used with the vrrp delay reload CLI, the later
timer rules the VRRP enabling. For example, if vrrp delay reload is 600 and the vrrp delay
minimum is 300:
● When the system reloads, VRRP waits 600 seconds (10 minutes) to bring up VRRP on all interfaces
that are up and configured for VRRP.
● When an interface comes up, whether as part of a system reload or an interface reload, the system
waits 300 seconds (5 minutes) to bring up VRRP on that interface.
Related
Command
vrrp delay reload — sets the delay time for VRRP initialization after a system reboot.
vrrp delay reload
Set the delay time for VRRP initialization after a system reboot.
C9000 Series
Syntax
vrrp delay reload seconds
Parameters
seconds
Enter the number of seconds for the delay. The range is from 0 to 900 (0 indicates
no delay).
Defaults 0
Command Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.8.0 Introduced on the S4810.
Virtual Router Redundancy Protocol (VRRP) 1773